November 11, 2024
How to Recharge a Flum

If you want to save some money and extend the life of your Flum vape, you’ll be thinking of recharging it. But do you know how to recharge a Flum vape? 

To recharge a Flum vape, first, turn it off completely. Use the original Flum USB cable and plug it into the vape. Connect the other end to a powered USB port that provides at least 1A output, like a computer or wall adapter. Recharging usually takes 30 mins to 1 hour.

Now, what about those models that don’t support recharging? Well, Keep reading and find out the details. 

Are Flums Rechargeable?

Yes, it is possible to recharge some Flum vape models. However, not all Flum vapes are the same. 

  • Some models, such as the Flum Pebble, have a visible charging port at the bottom of the device.
  • Other models, such as the Flum Float, do not have a charging port. By default, you can’t recharge these models. 

However, I’ll also provide a DIY guide below to recharge these.

How To Recharge A Flum Vape? (Step-by-step Guide)

Recharging a rechargeable Flum model such as the Flum Pebble is easy and convenient. You just need a few tools and materials. 

Here is how to charge Flum Pebble or any other rechargeable Flum model:

A. Tools And Materials Needed For Recharging A Flum

  • A Flum vape that is rechargeable
  • A micro USB/USB-C cable
  • A power source, such as a wall adapter, a laptop, or a power bank

B. Preparing The Flum For Recharging

Here are some things that you need to do:

1. Turn off your Flum vape: You can do this by pressing the button on the device five times quickly. You should see a light flash to indicate that the device is off. 

If your Flum vape has no button, you don’t need to turn it off.

2. Remove the mouthpiece from your Flum vape: You can do this by gently pulling the mouthpiece away from the device.

3. Locate the charging port on your Flum vape: The charging port should be visible right at the bottom of the device. 

C. Connecting The Flum To A Charging Source

Here are the steps that you need to follow:

  • Plug one end of the USB-C cable into the charging port of your Flum vape. 
  • Plug the other end of the USB-C cable into a power source. This could be a wall adapter, a laptop, a power bank, etc. 
  • The device should be charging. 

Well, now you’re on top of how to charge the Flum device. If you have a rechargeable model like the Flum Pebble, your vaping experience will be super smooth now. 

When it comes to charging a Flum, a common question is “How long do you charge a Flum?” The answer is fairly straightforward. For optimal performance, a Flum should typically be charged for a duration ranging from 30 minutes to 1 hour.

This charging period ensures that the device receives enough power to function efficiently without overcharging, which can be detrimental to its longevity and performance.

Remember, while it’s important to keep your Flum charged, it’s equally important to avoid overcharging to maintain the device’s health.

How To Charge Flum Float Or Other Non-rechargeable Flum Vape Models? (Do At Your Own Risk)

Some Flum vape models, such as the Flum Float, are not designed to be rechargeable. However, some users have found ways to charge flum float and other non-rechargeable Flum vape models, too.

Folks from Thesmokybox.com do this using tools and techniques the manufacturer does not recommend. Therefore, I advise you to do them at your own risk.

Here are the steps that you should follow:

  1. Remove the mouthpiece from the Flum vape by pulling it off gently.
  1. Use the flathead screwdriver to pry open the bottom part of the device. The battery and the tank are located here.
  1. Use the scissors to cut the wires that connect the battery and the tank to the device. Be careful not to cut the wires too short. You will need to reconnect them later.
  1. Use tweezers to pull out the device’s battery and tank. You should see a small circuit board with two metal contacts on the battery.
  1. Take a micro USB or USB-C cable. Use the scissors to strip the ends of the cable. This will expose the red and black wires inside.
  1. Use the tweezers to attach the red wire of the USB cable to the positive contact of the battery. Then, attach the black wire to the negative contact similarly. 

Make sure that the wires are secure and do not touch each other.

  1. Plug the other end of the USB cable into a power source. This can be a wall adapter, a laptop, or a power bank. The battery should start charging.
  1. Wait for the battery to charge fully. This may take up to an hour.
  1. Unplug the USB cable from the power source and the battery. Remove the wires from the contacts of the battery.
  1. Use the tweezers to put the battery and the tank back into the device. Make sure that the wires are connected back to their previous places.
  1. Use the flathead screwdriver and close the bottom part of the device. Press it firmly until it snaps into place.
  1. Put the mouthpiece back on the device. Then, turn it on.
  1. Enjoy your Flum vape.

Can I Use Any USB Charger To Recharge My Flum?

You can’t just use any charger. You will need to use a compatible USB charger, cable, and power source:

  • Charger Fit: The charger must support a USB-C cable. According to Flumpebbles, Flum vapes only have a USB-C charging port. 
  • Charging Specs: The charger must provide 5V power and at least 1A (1000mA) output. Lower amperage will also work, but it will charge slower.
  • Cable Type: Use the factory Flum USB-C cable for the fastest charging. Aftermarket USB-C cables will also work.
  • Power Source: Wall adapters, computers, car chargers, and power banks will work. They must provide 5V/1A power.

Explore the Best Vape Experience: Compare Elf Bar and Flum Now – Your Guide to Making the Right Choice!

How Many Times Can I Recharge A Flum Before It Needs To Be Replaced?

With proper care, you should be able to recharge and drain a Flum’s lithium-ion battery up to 100 times. That translates to around 2-3 months of average use

However, the fun fact is that your cartridge will run out in a month (according to Indejuice). So, being able to recharge up to 100 times is plenty more than necessary. 

Final Words

Recharging an empty Flum vape battery is necessary to continue enjoying your Flum. 

And now you know how to recharge a Flum vape. The process for it is quite straightforward. With the proper USB charger, cable, and power source, you can easily recharge a depleted Flum battery in 1 hour.

So, vape on!